© 2018 Miniveyor Products Ltd -
The original Miniveyor® portable mini conveyor system was created by us in the early 1990’s to offer a light, portable
and flexible conveying system for confined space work and represents one of the most powerful and flexible
solutions for the rapid deployment of a temporary conveyor system.
Designed initially for hard rock, narrow reef mining, the adoption of our NEW mine spec Miniveyor can reduce the labour
count in underground mining, provide for an increased level of productivity, safety, improved general
working environment and the removal of “all or as much as possible” ore from the face
The original Miniveyor system is probably the safest system in the world and has numerous safety features built in as standard. Our new mine spec models take it to an even higher level to handle a tough mining environment. We do not compromise on safety.
Mine spec PORTABLE haulage SYSTEM
Increasingly mining operators now see spillage control as a major focus and Miniveyor conveyors are the ideal tool to clean up spillage and debris from production belts, mills, crushing plants, and transfer points.
Why use outdated equipment such as wheelbarrows and buckets when the Miniveyor can do the work faster while also helping reduce the amount of injuries on the job? Each of our Miniveyors can be connected end to end, creating a conveyor belt as long as needed. In fact, it is so simple to use that a 30-
Due to its size, weight and flexibility Miniveyor, previously only deployed for scavenging under belts or belt spillage clean-
“MINIVEYOR……PROBABLY THE SAFEST PORTABLE CONVEYOR SYSTEM IN THE WORLD”
Miniveyor is also ideal for clearing debris following fall of ground incidents.
The versatility of miniveyor lends itself in the maintenance of existing plant such as ball mills and smelter furnaces where access is a problem
‘The Miniveyor modular conveyor system could be just one of many innovations that propels this challenged sector of the mining industry towards the sustained viability that the Stakeholders genuinely desire’
Every part of the system has been
designed with safety in mind. The control
box circuit is 24V AC and has a monitored
loop safety system to protect the electrical circuit if it is compromised. NVR switches are fitted as standard so the system will not re-
The drive unit and tail pulley are contained within the frame offering NO pinch or nip points and the belt edges are protected under guard. A pre-
Custom electrical connectors are
employed so that the electrical safety
systems cannot be bypassed by operators
and each module has a motor failure
indicator signal light to expedite a quick
change over of modules.
Transfer Point Clean up
Under Belt Cleaning
With the aim of increasing the level of productivity under an improved underground environment, whilst simultaneously cutting costs, the introduction of Miniveyor® provides an alternative ore and
waste removal solution to the current systems employed at production and development faces.
THE NON NEGOTIABLE ISSUE
The system of Miniveyor® conveyors can be installed by minimal labour (two people can carry a Miniveyor unit)
in a confined space environment. The system is modular allowing for flexibility of installation, therefore and most importantly it to advances with the development faces which standard conveyors are unable to do.
The Miniveyor® system is able to transport up to 390 tons in a 6.5 hour cleaning shift. Constructed from aircraft grade aluminium and stainless steel, Miniveyor is very
robust, having been designed for arduous conditions. With correct maintenance protocols in place the units will provide many years of service.
The modular conveyor system, unlike conventional extraction systems, is able to remove all or a very high percentage of all ore blasted, particularly fines which are deemed to be carrying higher value than the larger fraction. The modular conveyor system does not generate additional fines by extra attrition. This may then preclude the need to undertake costly vamping programs as faces advance and new sections are developed (opened). It would also improve cash-
The NEW mine spec Miniveyor provides for a quiet, fume/dust free and safe environment compared to conventional systems. This effectively translates to a
much reduced ventilation requirement which will
save the mine material costs in energy consumption and excavation.
Miniveyor Products Ltd
Unit 4B Tetbury Industrial Estate
Gloucestershire GL8 8EZ
Company Registered in England & Wales.
Company Reg. No. 6704973
+44 1666 504044
For more information on our new mine spec miniveyor system contact us now using the button below >>>